Today I will show you how to make this amazing friendship bracelet that has a letter ‘v’ pattern within it. This bracelet pattern is a bit more difficult than normal friendship bracelet instructions, so you will need a free afternoon to make this one. If you are still interested, find the illustrated instructions below.

You Might Enjoy Our Other Friendship Bracelets Crafts Too

How to Make V Shaped Arrows Friendship Bracelets Illustrated Instructions

Crafts Materials Needed

– Embroidery Floss (preferred) or Yarn
– Scissors
– Optional – Cardboard
– Optional – Doll Pins or Sewing Pins

Measuring the Embroidery Thread for your Bracelets

To measure the lengths of your threads, take a piece and hold it from your hand to your shoulder. This is one arm’s length of thread. However, you need 2 arms lengths for each thread, so just use the first arms length of thread to measure out a 2nd arms length. Look at the picture above to see how I folded the string over to get the 2nd arms length.

Use this first string to measure out 3 more strings. You need 4 different colors for this bracelet.

Step 2

Find 4 different colors of strings…each 2 arms lengths. Put them each end to end and then smooth them out.

Step 3

Now fold the threads in half like in the picture above.

Step 4

We are now going to make a loop at the end to make a clasp type feature to tie the bracelet together after it is done.

Do this by holding the top of the string in a loop and then holding a bit down with your other hand, but keeping your index finger out.

Then take the loop-holding hand and wrap the string around your index finger of the other hand.

Step 5

Now, with the index finger hand, pinch the circle that was just created on the index finger….pinch it where the threads cross.

Step 6

Now slip the circle off of the index finger.

Step 7

Pull the loop through the pinched circle.

This is what my loop looks like.

The Way That is Easiest to Work

Before we start making our friendship bracelet, let me show you the way that I worked on this. I took a cut-out piece of cardboard, 2 pins, and a clip, and put them together like in the picture above. I took the clip and hooked it on the loop…to hold it down. I took the 2 pins to keep strings out of the way while I worked. It worked out AMAZINGLY. I wish I had done this when I was a child, I used to work with just tape and this works so much better.

Step 9

Okay, now lets start. You should have 8 strings hanging out from the bottom of the loop. Spread them out like I did above…like in a mirror image.

In this project, we will call the strings on the left, the left strings. We will call the strings on the right, the right strings.

It might help you to take some crayons or colored pencils and map out your colors on paper…just the way that I did above, so you don’t get confused.

Step 10

Now we will start on the left side strings. Put the right-side strings up on the pin to get them out of the way.

On the left side strings, we will go from left to right….so the blue string (string #1) will be the knotting string…in other words, the string that we will be making knots with.

Form a letter ‘L’ with the blue string…as pictured above.

Step 11

Now tuck the blue string under the yellow string and into gap between blue and yellow string. You are making a knot, think of the way that you tie a knot on your show lace, however in this case, always make sure the knotting string (blue) goes over and then under the string you are knotting over (yellow) before pulling.

Step 12

Now pull the blue string up until a beautiful blue knot is made. Make sure to hold the yellow string down, and that not other strings get in the way while pulling.

Step 13

Do the same exact thing over again to make a double knot.

Step 14

Notice that you made 2 blue knots on the top of the yellow string.

Notice that the blue string is now in place #2.

Now we will knot the blue string over the pink string.

Step 15

Knot the blue string over the pink string twice to make a double knot.

Step 16

Now this is what your friendship bracelet will look like now.

Step 17

Now double knot the blue string over the orange string.

Step 18

Now this is what your friendship bracelet will look like. You are now done with the left-side strings…for now.

Step 19

Now take all of the left-side strings and put them on the left pin to get them out of the way.

Fan out the right-side strings in the correct order…in the mirror image that you created in step #9 of this tutorial.

Step 20

Now we are making knots with the blue string on the right side.

This time, we are going from right to left.

Form a backwards letter ‘L’ with the blue string over the yellow string.

Step 21

Pull the blue string up over the yellow string, under it and through the gap between the 2 strings. Pull it up and make a blue knot. Do this a second time to make a double knot.

Step 22

Next we will pull the blue string over the pink string and make 2 blue knots over the pink string.

Step 23

Here I show you the process of making the blue knots over the pink string.

Step 24

This is what your bracelet looks like now.

Step 25

Lets now make the blue knots over the orange string.

Step 26

This is what your strings look like now. You are now done on the right (typo on the picture above where it says left).

Step 27

Now we are done with the right side and we have to knot the 2 blue strings together in the middle to make the ‘v’ shape.

Step 28

Double knot the 2 blue strings together.

This is what your letter ‘v’ shaped arrow shape looks like.

Step 29

Now lets start all over again but with the yellow string as the knotting string.

Knot over the pink, orange, and blue strings on the left-strings side.

Knot over the pink, orange, and blue strings on the left-strings side. This is what it should look like.

Step 30

Now put the left-side strings over the pin to get them out of the way.

Now fan out the strings on the right side. We will now double knot the yellow string over the pink, orange, and blue strings on the right side.

Step 31

After we have done all the right-side knotting, take the yellow string down off the left-side pin and then double knot the right-side yellow string over the left-side yellow string.

Step 32

Now put the right side strings back on the pin.

Fan out the left side strings…and then double knot the pink strings over the orange, blue, and yellow strings. Then put all of these strings back on the pin.

Take the right side strings down off of the pin and fan them out. Then double knot the pink strings over all of the strings.

Then double knot the 2  pink strings together in the center.

Step 33

Do the same thing with the orange strings.

Step 29

Now this is what your string will look like with all four colors done once.

Now just repeat again and again and again until you are sick of it.

Finished Bracelet

When you have gotten enough done to cover most of the front of the bracelet. You can then…braid the left side of the strings….the braid the right side of the strings … so you have only 2 strings now. Then you can tie the 2 strings around the loop for a closed clasped- bracelet.

I hope that you enjoyed this craft!!

You Might Enjoy Our Other Friendship Bracelets Crafts Too

Technorati Tags: friendship bracelets, making friendship bracelets, make friendship bracelets, how to make friendship bracelets, v shaped friendship bracelets, arrows friendship bracelets, arrowhead friendship bracelet, flat friendship bracelets, embroidery floss, embroidery floss crafts, girls crafts, crafts for girls, friendship crafts, jewelry crafts, bracelets

admin · crafts for girls, Friendship Bracelets Instructions, Jewelry Crafts for Kids, Make Your Own Presents Crafts, Mother's Day Crafts, Valentines Day Crafts · 37 Comments

How to Make a Table Decoration Vase Craft Gift for Mom

I know that you love your Mom. Do you want to make a thoughtful gift for her? This is a small easy- to-make present that Mom will love to show off to her guests. You can change the color of the ribbons and decorations to make them match with your Mom’s tableware.

Crafts Materials Needed:

An empty mineral water bottle

A knife or craft cutter (adult supervision required)

A pair of scissors

Ribbon , colored paper, stickers and any material for decoration

Using a knife or craft cutter to cut the top of the bottle. Like I said above, make sure that you have adult supervision as this could be dangerous.

Cut around the bottle until  you get strips like this.

Roll each strip of plastic outward as shown above.

Here is another view of the bottle.

Decorate as you like with ribbon bows, paper cut outs, stickers etc. as shown above.

Doesn’t this table decoration / vase look beautiful? Your Mom will love it, especially if you fill it with flowers.

Technorati Tags: table decorations, table decoration crafts, make table decoration, gifts, make a gift, crafts for mom, mothers day, make a present for mom, crafts with bottles, crafts with water bottles

Sharon David · Make Your Own Presents Crafts, Mother's Day Crafts, Table Decorations Crafts · 2 Comments