How to Make a Glove Bunny for Easter

Get ready for a fun and creative craft because I have just that for you today.  In this post I am going to show you how to make a Glove Bunny for Easter.  That’s right…. it’s an Easter bunny made out of a Glove.  This is a great craft to do to actually use that glove that you no longer have the pair for.  After stuffing the glove you have a nice, cuddly Easter Bunny that would be perfect as an Easter decoration or a nice cuddly friend.  The choice is yours.  So, let’s get started.

Check out our other Easter Crafts.



How to Make a Glove Bunny for Easter



 

Materials Needed

Glove

2 Safety Pins

Stuffing

Glue

Clothespins or Clips

Cap

yarn

Construction Paper

Ribbon or Twist Tie

Cotton Ball

 

Step 1



Get a glove.



Get a glove.  Then fold middle finger down and the two outside fingers can be pushed to the back.



This is what the other side looks like.



This is what the other side looks like.


Step 2



Pin middle finger down from inside of glove.



Pin middle finger down from inside of glove.

 

Step 3



Fill with stuffing.



Fill with stuffing.

 

Step 4



Fold bottom part inside glove.



Fold bottom part inside glove.

 

Step 5



Glue and clip shut.



Glue and clip shut.

 

Step 6



Get a cap.



Get a cap.



Fill cap with glue.



Fill cap with glue.  Fill with tiny, cut pieces of yarn… as well as tiny little paper eggs that you cut out.



For a tiny handle use a ribbon or twist tie.



For a tiny handle use a ribbon or twist tie.

 

Step 7



Put tiny basket handle over one arm and then pin both arms together.



Put tiny basket handle over one arm and then pin both arms together.  Pin from behind arms.

 

Step 8



Glue cotton ball to back.



Glue cotton ball to back.

And, that’s it…. you just finished making your Glove Bunny for Easter.  Isn’t he a cutie patootie?!  Let me know how your Glove Bunny turned out in the comments below.  And, take a picture of it too and post that with the comment as well…. I’d love to see it.

Technorati Tags: , , , , , , , , , ,

How to Make a Nativity Scene for Christmas

All week long I have been showing you how to make the characters for a Nativity Scene.  Well, today you are going to set up your Nativity Scene complete with basket.  You have been working hard and today you are going to get to see the results of all your hard work.  If you need to still complete the Nativity character crafts…. not a problem.  I have all the crafts for the Nativity characters below.  So, let’s complete the Nativity Scene for Christmas, shall we….

Check out our other Christmas Crafts.



How to Make a Nativity Scene for Christmas



 

How to Set up the Nativity Basket

Materials Needed

Basket – large enough to hold the nativity scene

Gold or Yellow Thread

4 Twist Ties

Glue

 

Step 1



Take 4 twist ties and wrap gold or yellow thread around them.



Take 4 twist ties and wrap gold or yellow thread around them.


Step 2



Fold over corners to keep thread on.



Fold over corners to keep thread on.

 

Step 3



Twist one of the twist ties over the other, like a letter V.



Twist one of the twist ties over the other, like a letter V.

 

Step 4



Fold one side down to now look like a cross.



Fold one side down to now look like a cross.

 

Step 5



Twist another one around the first two.



Twist another one around the first two.

 

Step 6



Do one more to look like this.



Do one more to look like this.

 

Step 7



Glue the star on top of basket.



Glue the star on top of basket.  Add gold or yellow thread to the bottom of the basket.

Now that you have the background to the Nativity Scene done it is time to make the characters that will fill this Nativity Scene.

 

Nativity Scene Character Crafts



Nativity Scene Characters



 

How to Weave the 3 Wise Men



How to Weave the 3 Wise Men for a Nativity Scene



 

How to Weave a Baby Jesus and Cradle



How to Weave a Baby Jesus and Cradle for a Nativity Scene



 

How to Weave Mary and Joseph



How to Weave Mary and Joseph for a Nativity Scene



 

How to Make Yarn Clothespin Sheep



How to Make Yarn Clothespin Sheep for a Nativity Scene



 

How to Make Yarn Clothespin Donkeys



How to Make Yarn Clothespin Donkeys for a Nativity Scene



And, there you have it…. you have all the crafts needed to complete your Nativity Scene.  I would love to see how your Nativity Scene turned out.  Please share your Nativity Scene with all of us by leaving a picture in the comments below.  I’d love to see how it turned out.

Technorati Tags: , , , , , , , , , , , , , ,

How to Weave the 3 Wise Men for a Nativity Scene

Today I have a great craft perfect for the Christmas Holiday Season.  I am going to show you how to Weave the 3 Wise Men for a Nativity Scene.  There are a lot of steps to this craft, but I don’t want you to be intimidated by that.  The craft isn’t too complicated…. there are just a lot of steps because I wanted to be detailed in my instructions for you.  And, keep an eye out… I will be showing you how to Weave a Baby Jesus for this Nativity Scene in the next day or so too.

Check out our other Christmas Crafts.



How to Weave the 3 Wise Men for a Nativity Scene



 

Materials Needed

2″ x 4″ Piece of Cardboard

Pencil

Ruler

Scissors

Yarn or String  (Different colors for skin, beard, hair, clothes and crowns)

Needle

Fork

Black and Gold String or Thread

Rock, Stones, or Coins (something heavy)

Cotton for Filling

Safety Pin

Fabric from Old Clothes or Baby Clothes

Tape

Twist Tie

Sturdy Cardboard Box

Small Beads

 

Step 1



Cut out 2" x 4" piece of cardboard



Cut out 2″ x 4″ piece of cardboard.


Step 2



Mark sides with lines about 1/8 inch apart



Mark sides with lines about 1/8 inch apart… so every two lines on the inches side of the ruler.

 

Step 3



start cutting slits on lines that we drew in the previous step.



If you think that your cardboard will fall apart by cutting slits… firstly cover with clear tape.  Otherwise, just start cutting slits on lines that we drew in the previous step.

 

Step 4



Put string in the notch that is alone on one side



Put string in the notch that is alone on one side.  Tape it down.  Then pull the string all the way up the back of the cardboard.

 

Step 5



pull the yarn thru the first notch



In the last step you brought the yarn up to the top left side notch from behind the cardboard.  Now, pull the yarn thru the first notch… now yarn is in front again.

 

Step 6



bring the yarn over the next notch and pull down back again



Now, bring the yarn over the next notch and pull down back again.

 

Step 7



Bring the string all the way down to the bottom.



Bring the string all the way down to the bottom.

 

Step 8



Bring string over from back and up thru the first notch again



Bring string over from back and up thru the first notch again.

 

Step 9



pull the yarn behind and thru the 2nd tab



Now, pull the yarn behind and thru the 2nd tab so that there is now a loop in front and behind the first tab.

 

Step 10



bring yarn down behind cardboard and up thru next slit.



Now, bring yarn down behind cardboard and up thru next slit.  Make loop in front of tab and bring down back of cardboard again.

 

Step 11



bring yarn down back and up bottom and thru the slit and make a loop in back and down next slit and down front again



Now, bring yarn down back and up bottom and thru the slit and make a loop in back and down next slit and down front again… continue this pattern.

 

Step 12



When done... tape string down.



When done… tape string down.

 

Step 13



Thread a needle



Thread a needle with yarn or string.

 

Step 14



Pull the yarn over and under each piece of yarn and leave a short tail.



Make your yarn as long as you want it to be.  Pull the yarn over and under each piece of yarn and leave a short tail.  ***Notice that you start weaving on the side that does not have loops.

 

Step 15



go OVER the first thread



Now, turn the cardboard over and you will weave on this side too.  On the other side, you went UNDER the last thread…. so here go OVER the first thread.

 

Step 16



Keep weaving on both sides of the cardboard



Keep weaving on both sides of the cardboard.  Every few times or so, take the fork and push the threads down.

 

Step 17



push the needle down thru loops in past rows



When the thread is nearing the end, then push the needle down thru loops in past rows….



To start a new piece of yarn... just put the string in where you left off



… To start a new piece of yarn… just put the string in where you left off… like you see above.

 

Step 18



When you get to about the half way point... change the yarn to skin color - which could be brown, tan, pink, cream, etc.



When you get to about the half way point… change the yarn to skin color – which could be brown, tan, pink, cream, etc.  Go as far to the top as you can.

 

Alternative Way to Make the Face

Step A



Weave back and forth on center strings if you want to make skin only in the center.



An alternative way to make these figures are to make the face only in the center (like small image above).  Weave back and forth on center strings if you want to make skin only in the center.  So, don’t go around the back for making the face.

 

Step B



We start by pushing the yarn through the same loop that the bottom left side of the face used.



Choose the color that will be around the face.  You will be using this yarn to weave around the face for a hood.  We start by pushing the yarn through the same loop that the bottom left side of the face used.

 

Step C



weave around back.



Now, weave around back.

 

Step D



Loop thru the string on the right side of the face



Now, come over on the right side of the face.  Loop thru the string on the right side of the face and then go over it and weave around back again.

 

Step E



Keep going



Keep going.  At the top of the figure you can weave all around it again.

 

Step 19



Use your needle to pull the loops off of cardboard.



Use your needle to pull the loops off of cardboard.

 

Step 20



you can now pull the weaved fabric off of cardboard



The loops are now off like this… you can now pull the weaved fabric off of cardboard.

 

Step 21



Take fabric off of cardboard



Take fabric off of cardboard…. it now looks like above image.

 

Step 22



Fold inside out and then tie loose threads into knots.



Fold inside out and then tie loose threads (the ones that were taped down in the beginning) into knots.  Turn back to right side.

 

Step 23



Get some black string or thread.



Get some black string or thread.  Tie a knot at one end.

 

Step 24



Make the eye.



Put needle inside of hole on top of the head… and then put the needle where the eye should be and pull it out the front of the face.  This way the knot is inside the figure and can’t be seen.

 

Step 25



just sew in eyes by pulling string in and out of the fabric until they look like eyes.



Then just sew in eyes by pulling string in and out of the fabric until they look like eyes.  To sew in the 2nd eye… pull needle under fabric and up in the spot where the 2nd eye should be.

 

Step 26



Tie a knot inside of figure.



Tie a knot inside of figure.

 

Step 27



Place a rock, coins or something else heavy in the bottom and make sure figure stands.



Place a rock, coins or something else heavy in the bottom and make sure figure stands.  Then fill the rest of the figure with cotton or something soft.

 

Step 28



Sew top of head closed



Sew top of head closed… with knot on the inside.

 

Step 29



To make belt... tie 3 pieces of string together and braid them.



To make belt… tie 3 pieces of string together and braid them.  Pin it to your pants to keep it down while you braid.  Tie knot when done with belt.

 

Step 30



Cut a piece of fabric from old shirt or baby clothes



Cut a piece of fabric from old shirt or baby clothes (ask Mom or Dad first).  Then wrap around figure and tie shut with belt.

 

Step 31



Use cardboard loom to make the beard.



Use cardboard loom to make the beard.  Wrap string around the short side of the loom.

 

Step 32



push a 2nd string under all the wrapped strings



When done wrapping string around side of loom… push a 2nd string under all the wrapped strings… like so.

 

Step 33



Take it off of cardboard.



Take it off of cardboard.

 

Step 34



Fold it in half and then sew it on below the eyes.



Fold it in half and then sew it on below the eyes.

 

Step 35



To make hair, push needle thru top of head



To make hair, push needle thru top of head, until just a bit of string is sticking out.

 

Step 36



with tail of string still out, push the needle back into the head somewhere else.



Then, with tail of string still out, push the needle back into the head somewhere else.

 

Step 37



When you have a loop of string... don't pull any further.  You just made a curl.



When you have a loop of string… don’t pull any further.  You just made a curl.  Now, stick the needle thru again… and the curl will stay now.

 

Step 38



When your figure has enough curls... then tie a knot and you are finished with the hair.



When your figure has enough curls… then tie a knot and you are finished with the hair.

 

Step 39



Tie a twist tie and wrap colored thread around it.



Tie a twist tie and wrap colored thread around it.  I used gold thread… you can use any color you wish.

 

Step 40



Fold ends of twist tie over to keep threads on and then push it onto your figure's head.



Fold ends of twist tie over to keep threads on and then push it onto your figure’s head.

 

Step 41



The 2nd crown is beaded on a cardboard loom.



The 2nd crown is beaded on a cardboard loom.  Just make slits 1/2 inch apart on both sides of a sturdy box.  The loom is threaded by putting string in first notch… taping it down.  Then just pull over to other side and put thru that notch.  Then put thru 2nd notch and pull to other side and continue.  When done… wrap around extra notches to keep in place.

 

Step 42



Tie thread to first string.



Tie thread to first string. ***Make sure to leave extra room on strings so you can tie knots at end.

 

Step 43



Put some small beads onto the needle and thread.



Put some small beads onto the needle and thread.  If you have 6 strings, you need 5 beads…. If you have 5 strings, you need 4 beads.

 

Step 44



Pull threads and beads under all 6 strings



Pull threads and beads under all 6 strings, so they are on the opposite side now.

 

Step 45



Push all the beads so that each bead is in between 2 strings.



The first row is the trickiest… and then each row gets easier.  Push all the beads so that each bead is in between 2 strings.

 

Step 46



push the needle thru all of them so that the needle is now on the opposite side again.



Then, while beads are up above the strings (because you are pushing below them)… push the needle thru all of them so that the needle is now on the opposite side again.

 

Step 47



Now, do this for all the rows.



Now, do this for all the rows.  Make as many as you feel fit.

 

Step 48



I took some gold thread and wove it over and under all of the strings a few times



Optionally, as an added touch… I took some gold thread and wove it over and under all of the strings a few times to make the crown surrounded in gold.

 

Step 49



Cut off string on both sides.



Cut off string on both sides.

 

Step 50



Tie it shut to make a crown.



Tie it shut to make a crown.

 

Step 51



Place crown on figure.



Place crown on figure.

 

Step 52



For the 3rd crown, you can use the same loom that you used for beading.  Thread it the same way.



For the 3rd crown, you can use the same loom that you used for beading.  Thread it the same way.  Weave over and under.

 

Step 53



When you have woven a long strip, then take loops off.



When you have woven a long strip, then take loops off.

 

Step 54



Cut loops in half.



Cut loops in half.

 

Step 55



Tie these strings into knots.



Tie these strings into knots.

 

Step 56



Roll this woven fabric lengthwise



Roll this woven fabric lengthwise…. like above image.  Sew it so it stays like that.

 

Step 57



Then sew into donut shape and place on figure's head.



Then sew into donut shape and place on figure’s head.

 



Finished 3 wise men craft



You have just finished weaving the 3 Wise Men for a Nativity Scene…. How did they turn out?  Please let me know in the comments below.  Also, take a picture of your Wise Men and share them in the comment as well.  I’d love to see them.  Come back to check out how to Weave a Baby Jesus for a Nativity Scene as well the Mary & Joseph craft, Yarn Clothespin Sheep craft and the Yarn Clothespin Donkey craft to complete your Nativity Scene.

Technorati Tags: , , , , , , , , , , , , , ,

How to Make Twist Tie Doll Figures with Moving Arms and Legs Crafts Idea for Kids

If you want to make your very own play dolls out of recycled twist ties, then find out how to. They come out really cool, with hug-gable & twist-able arms and legs … especially cool for Mom dolls that hug baby dolls. Find out how to make these from unused items around your house. Have fun.



How to Make Twist Tie Doll Figures with Moving Arms and Legs Crafts Idea for Kids



How to Make Twist Tie Doll Figures with Moving Arms and Legs Crafts Idea for Kids

Crafts Materials Needed

– Embroidery Thread or Floss
– Glue
– Scissors
– Twist Ties
– Markers or Paints

Step 1



Step 1 : Making Play Figures Figurines and Dolls Crafts Project



Take a twist tie and bend it in half.

Step 2



Step 2 : Making Play Figures Figurines and Dolls Crafts Project



Now take a second twist tie and bend it in half around the first twist tie…


Step 3



Step 3 : Making Play Figures Figurines and Dolls Crafts Project



and then wrap it around like this so you have 2 arms.

Step 4







Twist the first twist tie, below the arms, so it looks like this (after spreading the legs out).

Step 5







Now glue one end of embroidery thread / floss to the top of the figure…we are going to make the head. When you start wrapping the thread, make sure to leave a little of the twist tie at the top (the loop), unwrapped so you can put the hair through it at the end.

Step 6







Keep wrapping it around the head and put a bunch of glue on it when you feel you are done…cut the end and push the end down.

Step 7







Wrap a different color for the shirt….wrap all around the arms and chest….put a bunch of glue down, cut, and push the end of string down…You can fold the hands over the shirt if you want to.

Step 8







Choose another color for the pants and wrap the string all around the legs and thighs…cut and glue down. You can then fold the feet over.

Step 9







Fold some string and then push it through the loop at the top of the head.

Step 10



Step 10 : Making Play Figures Figurines and Dolls Crafts Project



You can either braid it or cut the ends off so the hair hangs better.



Step 11 : Making Play Figures Figurines and Dolls Crafts Project



Like this.



Step 12 : Making Play Figures Figurines and Dolls Crafts Project



Or braided like this.

Finished Miniature Doll Figurines



How to Make Twist Tie Doll Figures with Moving Arms and Legs Crafts Idea for Kids



You can paint or draw faces on them if you want to.

This is what the finished dolls look like. The neat thing is that the arms can bend around other figures to hug. I used a smaller twist tie for the baby and a long garbage bag twist tie for the Mommy figure.

Technorati Tags: , , , , , , , , , , , , , , ,